What tree trimming costs in Green Bay
A medium oak or maple in the 30-60 ft range is the most common job, and it runs $340 to $770. That spread exists because two trees of the same height can be very different jobs. A 50-foot tree in the open with no obstructions costs less than a 50-foot tree wedged between a fence, a power line, and the corner of a garage.
Small ornamental trees under 30 feet typically run $210 to $390. Large trees in the 60-80 ft range, like a mature white pine or silver maple, run $570 to $1,200. Getting multiple trees done in one visit usually lowers the per-tree price because the crew is already set up and the chipper truck is on site.
What changes the price
Several things push a quote higher:
- Height and canopy spread. More height means more climbing, rigging, and time.
- Proximity to the house or power lines. Tight spots require slower, more careful rigging. Utilities may need to be contacted.
- Tree health. Dead or brittle wood is unpredictable and takes longer to work safely.
- Access. A crew that can't get a bucket truck to the backyard has to do everything by hand.
- Debris removal. Some quotes include chipping and hauling. Others don't. Ask.
Timing matters in Green Bay for a specific reason. The city prohibits pruning oak trees from March 15 through October 15 under Municipal Code section 25.21. That window exists to limit oak wilt, which spreads through sap-feeding beetles that are active during warm months. Elm trees fall under the same restriction. If you have oaks or elms, schedule trimming between November and mid-March or you won't find a reputable arborist willing to do it.
Ash trees in Green Bay face a separate problem: emerald ash borer is an established pest here. The city advises against moving ash wood off-site to slow the spread. If your ash trees need trimming, ask the crew about their disposal practices.
Permits and local rules
For pruning on your own private property, there is no citywide trimming permit that you as a homeowner need to pull. However, a few rules apply to the people doing the work and to work near the street.
The City of Green Bay requires any contractor doing tree cutting or grinding on private property to hold an annual Tree and Brush Trimmer License, with an application fee of $25. Ask your crew if they're licensed in the city. It's a simple check that filters out unlicensed outfits.
If the job requires blocking a sidewalk, parking area, or traffic lane, the contractor needs a no-charge obstruction permit from the city. That's on the contractor to handle, but it's worth confirming they know about it.
Street trees and anything in the public right-of-way are a different matter entirely. The city's Forestry division evaluates those, and removal can require a curb-cut permit plus payment of the tree's assessed value. Don't touch a tree in the terrace strip without checking with the city first.
The city can also condemn a private tree if it's diseased, infested, or poses a hazard to a public street or park. If you've received a notice about a tree, act on it. The liability for ignoring a condemnation notice sits with you.
How to choose a tree service in Green Bay
TreeNerd lists 11 tree care businesses serving Green Bay, including AAW Tree Service, Epic Tree Care, Midwest Tree Experts, and Monster Tree Service. You can compare them there.
Before you hire anyone, confirm four things. First, ask for proof of liability insurance and worker's compensation. Tree work without coverage means your homeowner's policy is on the hook if something goes wrong. Second, verify their Green Bay Tree and Brush Trimmer License. Third, get the debris removal terms in writing. Fourth, if you have oaks or elms, confirm the crew understands the March 15, October 15 pruning restriction and won't schedule you inside that window.
Get at least two quotes. The lowest bid isn't always wrong, but a quote that's dramatically lower than the others usually means something is missing, often insurance.