What the job actually costs in Chicago
A mature oak or elm in the 40-to-60-foot range is the most common removal job in Chicago neighborhoods, and those trees typically land between $760 and $1,400. The low end of that range assumes clean access, no overhead wires, and a straightforward drop. The high end reflects tight city lots, a tree leaning over the house, or a trunk that needs to come down in sections from above.
Small ornamental trees under 30 feet, think crabapples or young maples, run $230 to $450. Large trees pushing 70 or 80 feet cost $1,300 to $1,850. Stumps are usually quoted separately; grinding a stump runs $75 to $250 depending on diameter.
What changes the price
Four things move the number more than anything else:
- Access. A crew with a bucket truck on a wide alley lot works faster than one doing hand-climbing on a narrow greystone property. Tight access adds cost.
- Proximity to structures. A tree 10 feet from the house requires slow sectional removal. One in an open backyard can come down faster.
- Condition. Dead or heavily decayed wood is unpredictable and slower to work safely. Expect a higher quote.
- Debris hauling. Some quotes include hauling, some don't. Ask up front whether the price covers chipping and removal or just the cut.
Chicago's density means most city lots have at least one complicating factor. Get two or three quotes and make sure they're all scoped the same way.
Permits and Chicago's tree rules
For a tree on your own private property, Chicago does not require a permit. No building permit, no forestry permit. You can hire a crew and have it done.
Parkway trees are different. The strip of ground between the sidewalk and the street is public-way property managed by the Bureau of Forestry. Under Chapter 10-32 of the Municipal Code, no one other than city-authorized personnel may remove, prune, or otherwise work on a parkway tree without a Forestry permit. You submit a Parkway Tree Work Permit Request to the Bureau of Forestry and allow at least 10 working days for scheduling. The city may require replacement trees or compensation for lost value as a condition of approval.
If your project involves construction near public trees, Chicago's Standard Tree Protection Instructions apply, and protective devices near the work also require a permit.
One more layer: Cook County has its own tree removal rules for certain larger trees on unimproved parcels. If your property falls outside the city's incorporated boundary or involves a large parcel, check with Cook County's Department of Building and Zoning.
How to pick a tree service in Chicago
TreeNerd lists 13 tree care businesses serving Chicago, including A1 Tree Service, All Seasons Tree Service, Arbor Green Tree Service, and BrightView Tree Care. You can compare them at TreeNerd.
Before you hire anyone, confirm two things: they carry liability insurance and workers' comp. Tree work on Chicago properties, with brick houses and narrow lots and power lines running through the canopy, is genuinely hazardous. If a crew member gets hurt on your property without workers' comp, you can be liable.
An ISA-certified arborist isn't required for removal, but it signals the company trains its people to industry standards. Ask for the certificate number and verify it at the ISA website.
Get quotes in writing. A legitimate crew will walk the property, not just eyeball it from the street. If the quote doesn't specify whether stump grinding and debris hauling are included, ask before you sign anything.