What tree removal costs in Fontana
Size is the biggest driver. A small ornamental under 30 feet costs $280 to $540. A 40-to-60-foot eucalyptus or pine runs $910 to $1,700. A large tree, 60 to 80 feet, lands between $1,550 and $2,200.
Beyond size, four things push the final number up or down.
- Access. A tree in an open backyard is cheaper to work than one crammed against a fence or the house. Cranes or aerial lifts add to the bill.
- Condition. Dead or brittle trees require more careful rigging. That takes longer and costs more.
- Debris removal. Many quotes separate the cutting from the hauling. Ask upfront whether grinding and removal are included.
- Stump grinding. Stump removal is almost always a separate line item, typically $100 to $300 depending on diameter.
Fontana sits in the Inland Empire, where heat stress and drought weaken trees faster than in coastal areas. A tree that looks alive from the street may have significant structural decay. Factor in a pre-removal inspection if you have any doubts.
Permits and local rules in Fontana
Fontana has a real tree protection ordinance, and it matters before you hire anyone.
Under Fontana Municipal Code §28-64, no one may remove a heritage, significant, or specimen tree on public or private property without first obtaining a tree removal permit. The ordinance covers specific species: native oaks (Quercus spp.), California walnut (Juglans californica), western sycamore (Platanus racemosa), London plane (Platanus acerifolia), and Deodora cedar (Cedrus deodara). The size threshold is at least one trunk measuring 6 inches in diameter at breast height, or two trunks totaling 8 inches DBH.
If your tree qualifies as protected, the city requires a permit application with photos, a site plan, and possibly a report from an ISA-certified arborist. When a permit is granted for removal, the city requires replacement trees, with species, size, and number determined by city staff.
For non-protected trees involved in certain city processes, the Fontana User Fee schedule lists a $30 per-tree fee for additional non-protected tree removals or relocations.
The ordinance also defines a Tree Protected Zone (TPZ): the area within the tree's dripline plus at least five feet, or 15 feet from the trunk, whichever is greater. Structures like driveways must avoid encroaching on the TPZ.
If you have any oak, walnut, or sycamore on your property, contact Fontana Public Works or Planning before scheduling removal. The permit requirement applies to both public and private property.
How to choose a tree service in Fontana
California requires tree contractors to hold a C-27 Landscaping or D-49 Tree Service contractor license from the CSLB. Ask for the license number and verify it at cslb.ca.gov. An unlicensed crew saves you nothing if something goes wrong.
Insurance is non-negotiable. Ask for a certificate of general liability and workers' compensation before anyone sets foot on your property. A crew working without workers' comp leaves you exposed if someone gets hurt.
For protected or borderline trees, hire a crew that employs or can produce a report from an ISA-certified arborist. Certification does not guarantee quality, but it signals someone has studied tree biology beyond how to run a chainsaw.
Get at least two quotes. Prices vary more than you'd expect between Fontana crews, and the lowest bid is not always the worst option, nor the highest always the best. Ask each company what the quote includes: chipping, haul-away, and stump grinding, or just the felling.
TreeNerd lists 15 tree care businesses serving Fontana, including A & S Landscaping, Ats Tree Works INC, Fregoso Gardenscape, and Future Landscape Service. You can compare local pros there and request quotes from multiple providers.