What stump grinding costs in Vancouver
Most homeowners in Vancouver pay between $130 and $160 per stump. The size of the stump matters less than you might expect at this price level. Grinding a small 12-inch stump and grinding a 30-inch fir stump both tend to land in the same range because the machine setup cost dominates the job.
What actually pushes prices higher:
- Multiple stumps on one property (crews sometimes discount the second and third)
- Root systems that extend under concrete, a fence, or a structure
- Slope or tight access that limits equipment
- Depth requirements if you plan to replant or lay sod over the spot
- Hauling away the grindings, which some crews charge extra for
Stump grinding leaves a pile of wood chips in the hole. If you want the hole filled with topsoil and the chips hauled off, ask about that separately before you book.
Permits and Vancouver's tree rules
Stump grinding alone on a standard residential lot in Vancouver usually does not require a permit. But if that stump is what's left after removing a tree, the removal itself may have required one.
Vancouver requires tree-removal permits for many private-property situations, including trees on commercial, industrial, or multi-family zoned properties, single-family lots larger than one acre in some cases, and any trees in or near sensitive areas or critical habitats. Heritage trees and street trees have their own layer of protection. Any work that could affect a street tree requires prior approval from the City Forester under Vancouver Municipal Code 12.04.080.
If a permit was required for the removal, the City of Vancouver's fee schedule is $113 for the first tree in a 12-month period and $324 for each additional tree in that same period. Those are removal permit fees, not grinding fees, but it's worth knowing before you hire anyone.
If you're not sure whether your situation triggers a permit, call the city's urban forestry office before work starts. A contractor who says permits are never required for residential work in Vancouver is not giving you the full picture.
Vancouver's tree conditions
Vancouver gets wet winters and strong wind events. Both matter for stumps. A large decaying stump from a wind-thrown tree can have root systems that shifted or heaved during the fall, which makes grinding more complex. Fir, cedar, and big-leaf maple are the common species here, and fir stumps in particular have dense wood and deep taproots that take more grinder time.
If the stump is near a critical area, a drainage channel, or a sensitive habitat buffer, the city's urban forestry rules may apply even to the grinding work. Check the city's Urban Forestry Management Plan or ask the city directly if your property is near a wetland or steep slope.
How to choose a stump grinding pro in Vancouver
TreeNerd lists 11 tree care businesses serving Vancouver, including Alexa's Tree Service LLC, Arbor City Tree Care, Arborscape Tree Care, and Cascade Tree Works. You can compare them at TreeNerd to find licensed, insured crews.
Before you hire anyone:
- Ask for proof of liability insurance and confirm they carry workers' comp. Stump grinding is low-risk compared to climbing work, but equipment accidents happen.
- Get at least two quotes. Prices in this range are competitive, and some crews will negotiate on multi-stump jobs.
- Ask exactly how deep they grind. Six inches is standard. If you're replanting a tree, you want 12 inches or more.
- Confirm who handles the wood chips. Some crews leave them; some haul them. Both are fine if you know going in.