TreeNerd
treenerd
Stump Grinding · St. George, UT

Stump Grinding in St. George, UT: Costs and What to Expect

Stump grinding in St. George runs $110 to $140 for most jobs, whether the stump is a small 12-inch shrub base or a large 30-inch trunk left after a tree removal. That narrow range reflects a fairly standardized service: a machine grinds the stump down several inches below grade and leaves wood chips behind. Utah tree work runs about 3% above the national average, so prices here land slightly higher than the national baseline.

Typical stump grinding and removal cost in St. George
Small stump (12" wide)$110–$140
Average stump (18" wide)$110–$140
Large stump (30" wide)$110–$140
Get your exact priceBrowse St. George arborists

What stump grinding actually costs in St. George

Most homeowners here pay between $110 and $140 per stump. That price holds across a wide range of stump sizes because the real cost driver is machine time and setup, not diameter alone. A contractor hauling a grinder to your yard has fixed overhead whether the stump is 12 inches or 30 inches across.

A few things can push a job toward the higher end or beyond it:

  • Access: If the grinder can't reach the backyard easily, the crew may need to hand-dig or use a smaller machine. That adds time.
  • Root spread: Deep or sprawling roots take longer to chip through than a shallow stump.
  • Debris removal: Most crews leave the wood chips on site. If you want them hauled away, expect an added fee.
  • Multiple stumps: Some contractors drop the per-stump price if you have three or more on the same visit. Ask upfront.
  • Rocky desert soil: St. George sits on red rock and sandy desert ground. Rocky substrate can dull grinder teeth fast, which some crews factor into their quote.

Get at least two written quotes that spell out what's included: grinding depth, chip cleanup, and whether the hole gets backfilled.

Permits and local rules in St. George

For a typical stump on private residential property, St. George does not have a clear permit requirement that applies to stump grinding alone. That said, the city code does matter in a few situations.

If your stump is left over from a tree that appeared in an approved landscape plan, you may need city approval before removing it. The St. George City Code § 10-23-1 states that trees included in approved landscaping cannot be removed without city permission.

If you're doing any construction, grading, or demolition alongside the stump removal, the same code requires a tree-protection barrier around any preserved trees on the site before work begins.

There's also a heritage tree consideration. St. George's Shade Tree and Beautification Board can nominate rare or historically significant trees for designation under Utah's Heritage Trees Act. Damaging a designated heritage tree can trigger restitution to the city based on an ISA valuation formula. If you're unsure whether your tree qualifies, check with the city before the grinder shows up.

When in doubt, call the St. George Planning Department before scheduling the work.

How to pick a stump grinding contractor

TreeNerd lists 10 tree care businesses serving St. George, including Apex Tree Professionals, Arbor Tech, BA Robinson Tree Service Inc, and Highline Tree Services. You can compare them at TreeNerd to see who operates in your area.

Beyond the directory, here's what to check:

  • Proof of insurance: Stump grinders are heavy machines. Ask for a certificate of liability insurance before anyone starts.
  • ISA certification: Not required for stump grinding, but an arborist on staff signals a crew that understands trees rather than just equipment.
  • Written quote: A phone estimate is not a quote. Get the scope in writing.
  • Grinding depth: Standard is 6 to 12 inches below grade. If you're planting grass or a new tree in the spot, ask for deeper.

A reputable crew will also tell you honestly whether the stump needs full root excavation or whether grinding alone will solve your problem.

Tree services serving St. George

St. George, UT

Apex Tree Professionals offers tree service, trimming, removal, stump removal, pruning, and wildfire mitigation in Santa Clara, Utah.

Tree serviceTree trimmingTree removalStump removalTree pruning
St. George, UT

Arbor Tech serves St. George, Washington, Ivins, Hurricane, and central and southern Utah.

PruningDeep-root fertilizationYard health
St. George, UT

Tree care business listed in St. George, UT. Confirm services and service area directly with the business.

Tree removalTree trimming
St. George, UT

Tree care business listed in St. George, UT. Confirm services and service area directly with the business.

Tree service
St. George, UT

Master Arbor provides stump grinding and comprehensive tree services for homeowners in St. George, Hurricane, Washington, and surrounding Southern Utah areas.

Tree removalTree pruningTree trimmingStump grindingStump removal
St. George, UT

Southern Utah Tree Service has provided full-range tree service to the St. George area for over 20 years.

Full-range tree service
St. George, UT

St George Tree Service is a local established business offering stump grinding, stump removal, and other tree services in St. George, Utah.

Tree removalTree trimmingTree pruningStump grindingStump removal
St. George, UT

Tree care business listed in St. George, UT. Confirm services and service area directly with the business.

Tree service
St. George, UT

The Arborist LLC is a local tree service in St. George, Utah providing tree removal, pruning, stump grinding, and emergency service while serving Santa Clara and other Washington County communities.

Tree removalPruningStump grindingEmergency serviceTree service
St. George, UT

Whipple Tree Service offers tree trimming, removal, emergency tree work, and commercial tree services in St. George, Utah and surrounding areas.

Tree removalTree trimmingEmergency tree servicesCommercial tree removalRegular tree maintenance

See all tree care businesses in St. George

Stump Grinding in St. George: common questions

How much does stump grinding cost in St. George, UT?

Most stump grinding jobs in St. George run $110 to $140. That price applies across a range of stump sizes because setup and machine time are the main cost drivers. Rocky desert soil can add to the job if it dulls grinder teeth, so confirm the final quote in writing before work starts.

Do I need a permit to grind a stump on my property in St. George?

There's no clear permit requirement for basic stump grinding on private residential property. However, if the tree was part of an approved landscape plan, St. George's city code requires city permission before removal. If you're combining stump work with any construction or grading, additional rules apply under St. George City Code § 10-23-1.

What is a heritage tree and could mine be one?

St. George's Shade Tree and Beautification Board can nominate trees that are rare, endangered, or historically significant for heritage designation under Utah's Heritage Trees Act. Damaging or removing a designated heritage tree can result in restitution to the city calculated using ISA valuation. If your tree is unusually old or large, check with the city before grinding the stump.

Will the contractor remove the wood chips after grinding?

Most crews in the area leave the wood chips in place. Hauling them away is usually an add-on service that costs extra. If you want a clean yard or plan to reseed the area, ask for chip removal in your quote before they start.

How deep does stump grinding need to go?

Standard grinding goes 6 to 12 inches below grade, which is enough for most lawn situations. If you plan to plant a new tree or lay sod directly over the spot, ask the contractor to go deeper and to backfill the hole. In St. George's sandy and rocky soil, confirm the crew has equipment suited for the ground conditions in your yard.

Local sources: Title 7, Ch. 4 Trees | St. George City Code, Utah - Christmas Tree Permits, Tree Protection in St. George, UT (2026), Permits - Dixie National Forest, [PDF] shade tree and beautification board - Utah.gov

Listings are compiled from public records — primarily state license rosters — and other public sources, and may not reflect a business's current details or status. Always confirm licensing and insurance before hiring. Business owners can claim their listing free, or request a correction or removal from the “Update or remove” link on any profile.