TreeNerd
treenerd
Stump Grinding · Rochester, NH

Stump Grinding in Rochester, NH: Costs and What to Expect

Stump grinding in Rochester, NH runs $120 to $150 for most residential jobs, whether the stump is 12 inches wide or 30. New Hampshire tree work averages about 7% above the national baseline, so prices here sit slightly higher than in many other states. If you have several stumps, most crews will discount the per-stump rate when you bundle them into one visit.

Typical stump grinding and removal cost in Rochester
Small stump (12" wide)$120–$150
Average stump (18" wide)$120–$150
Large stump (30" wide)$120–$150
Get your exact priceBrowse Rochester arborists

What stump grinding costs in Rochester

Most homeowners in Rochester pay between $120 and $150 per stump. That range holds across small, average, and large stumps, which reflects how local crews price here: a minimum-job fee rather than a strict per-inch rate. The flat-range pricing means a single small stump costs nearly as much as a large one, because the crew, equipment, and drive time are the same either way.

If you have a cluster of stumps left over from a tree removal project, ask about a multi-stump rate. Crews can often knock $20 to $40 off each additional stump when everything is done the same day.

What changes the price

A few things push a job toward the high end or beyond the typical range.

  • Root spread. A stump with a wide, dense root system takes longer to grind than a clean-cut stump of the same diameter.
  • Access. A stump in an open backyard is straightforward. One behind a fence or on a slope may require a smaller machine or extra setup time, which adds cost.
  • Stump age. Fresh stumps from recently cut trees are harder to grind than older, partially rotted ones.
  • Debris hauling. Grinding leaves a pile of wood chips. Some homeowners keep the chips for mulch. If you want them hauled away, expect an added charge, usually $30 to $75 depending on volume.
  • Underground utilities. If the stump sits near buried lines, the crew has to work carefully and may grind shallower. Call 811 before any stump grinding so New Hampshire 811 can mark your lines at no charge.

Permits and local rules in Rochester

No specific Rochester stump grinding ordinance was found in current research. Rules around tree removal and stump work vary city to city in New Hampshire. Before you remove a stump, confirm with the City of Rochester or your neighborhood association whether any permit or approval is needed, especially for stumps near the street, a wetland buffer, or a shared property line. A quick call to the city's planning or public works department takes five minutes and avoids bigger problems later.

How to choose a stump grinding company

TreeNerd lists 12 tree care businesses serving Rochester, including Arborpro Plant Care Experts, LLC, Burke's Tree Service, Faulkner Stump Grinding & Tree Care, and FX Tree Service, LLC. You can compare them at TreeNerd.

When you call for quotes, ask these questions directly.

  • Do you carry general liability and workers' comp? Ask for a certificate, not just a yes.
  • How deep do you grind? Six inches below grade is standard for replanting. Twelve inches is better if you plan to lay sod.
  • What happens to the chips and the soil mound? Confirm whether cleanup is included or priced separately.
  • Do you have experience with stumps near irrigation lines or buried utilities?

Get two or three quotes. The spread between a low and high bid on a single Rochester stump job is rarely more than $50, but it tells you something about how each crew prices and communicates.

Tree services serving Rochester

Rochester, NH

Tree care business listed in Rochester, NH. Confirm services and service area directly with the business.

Rochester, NH

Tree care business listed in Rochester, NH. Confirm services and service area directly with the business.

Rochester, NH

Tree care business listed in Rochester, NH. Confirm services and service area directly with the business.

Rochester, NH

Tree care business listed in Rochester, NH. Confirm services and service area directly with the business.

Rochester, NH

Tree care business listed in Rochester, NH. Confirm services and service area directly with the business.

Rochester, NH

NH Forestry Services offers professional tree removal and on-site chipping, including emergency response, for homeowners, farmers, and property managers from Alton to Rochester and surrounding New Hampshire towns.

Tree removalOn-site chippingEmergency tree servicesForestry consultingLand clearing
Rochester, NH

P. Choate Tree Service provides tree and plant health care, removals, preservation, and consulting by certified arborists for residential and commercial clients in Laconia and surrounding New Hampshire communities.

Tree removalPruningPlant health careTree preservationCabling & bracing
Rochester, NH

Tree care business listed in Rochester, NH. Confirm services and service area directly with the business.

Rochester, NH

SavATree's Rochester, New Hampshire office provides certified arborist tree and shrub care services including trimming and removal.

Tree trimmingTree removalTree and shrub care
Rochester, NH

Urban Forestry Tree Care provides tree services in Rochester, NH and surrounding areas.

Tree removalTree pruningTree trimmingTree care
Rochester, NH

Full-service tree care and plant health care company serving New Hampshire, southern Maine, and northeastern Massachusetts from its Rochester, NH base.

Tree removalTree pruningStump grindingPlant health careInsect and disease control
Rochester, NH

Tree care business listed in Rochester, NH. Confirm services and service area directly with the business.

See all tree care businesses in Rochester

Stump Grinding in Rochester: common questions

How much does stump grinding cost in Rochester, NH?

Most jobs in Rochester run $120 to $150 per stump. That range covers stumps from about 12 inches to 30 inches wide. Multiple stumps on the same visit usually come in cheaper per stump.

Do I need a permit to grind a stump in Rochester?

No specific Rochester permit requirement was found in current research, but rules vary. Call the City of Rochester's planning or public works department before you grind, especially if the stump is near a road, wetland, or property line.

Does stump grinding include hauling away the wood chips?

Not always. Many crews leave the wood chip pile for you to use as mulch. If you want it removed, ask upfront. Hauling typically adds $30 to $75 to the job depending on how much material there is.

How deep will the crew grind the stump?

Standard grinding goes about 6 inches below grade. If you plan to replant grass or lay sod over the spot, ask for 10 to 12 inches. Confirm the depth before the crew starts, since going deeper takes more time and may cost more.

Should I call 811 before stump grinding in New Hampshire?

Yes. Call 811 or visit nh811.com to have underground utilities marked before any grinding. It's free, and it protects you from a costly or dangerous mistake if a water line or electrical conduit runs near the stump.

Local sources: Tree Removal Permit in Rochester, NH: Requirements & Cost (2026), [PDF] city of rochester subdivision regulations - rochesternh.gov, Tree Removal & Maintenance, Tree Removal, city of rochester site plan regulations

Listings are compiled from public records — primarily state license rosters — and other public sources, and may not reflect a business's current details or status. Always confirm licensing and insurance before hiring. Business owners can claim their listing free, or request a correction or removal from the “Update or remove” link on any profile.