What stump grinding actually costs in Raymond
The price range here is tight: $120 to $150 covers small stumps (around 12 inches wide) through large ones (around 30 inches). That's the local adjusted range for New Hampshire, which sits about 7% above national averages.
What can move the price inside that range, or beyond it:
- Number of stumps. Most companies charge a per-stump rate, but some offer a lower per-inch rate when you have several to grind at once. If you have three stumps from a recent removal, ask about a multi-stump price.
- Access. A stump in an open backyard is straightforward. One tucked between a fence line and a garden bed may require a smaller machine or more hand work, and that takes time.
- Root spread and depth. Standard grinding goes 6 to 12 inches below grade, which is enough to replant grass. If you want to plant a new tree in the same spot, tell the contractor upfront, because deeper grinding costs more.
- Debris hauling. Grinding leaves a pile of wood chips. Some crews include chip removal; others leave the pile for you to use as mulch. Clarify this before the job.
Permits and local rules in Raymond
For a stump on your own private property, Raymond does not appear to require a general town permit based on available zoning and code materials.
Two situations where you need to check before grinding:
Public shade trees and right-of-way. New Hampshire state law covers trees on town-owned land or within the highway right-of-way. Removal requires a process through the town's tree warden, including a public hearing. If your stump is near the road, confirm whether it sits in the right-of-way before any work starts. No fee for this permit appears in the state statute, but the process still takes time.
Scenic roads. Raymond's zoning rules require prior written consent from the planning board before cutting or removing trees on a designated scenic road under RSA 231:157. If your property fronts one of these roads, this applies to you.
Wetlands and shoreland areas. Raymond's 2022 Hazard Mitigation Plan flags riverbank and wetland areas as regulated zones. Trees in or near these areas can trigger a separate review under state environmental rules. If the stump is close to a wetland, stream, or pond, contact the NH Department of Environmental Services or Raymond's planning office before scheduling the grind.
For routine private-property stumps away from roads and wetlands, you can generally schedule the work without a permit, but confirming with the town takes a short phone call and is worth it.
How to choose a stump grinding company in Raymond
TreeNerd lists 6 tree care businesses serving Raymond, including 603 Yard & Tree Service LLC, Delano Property Services, Garrett Tree Service, and Granite State Tree Service. You can compare them at TreeNerd before reaching out.
When you contact a company, ask these things directly:
- Are you insured for property damage and liability? Ask for a certificate, not just a yes.
- Does your price include chip removal, or do you leave the pile?
- How deep do you grind by default?
- Do you handle the permit check if the stump is near the road?
Get at least two quotes. With a tight price range like $120 to $150, the quotes should be close. A big outlier in either direction is worth questioning. Cheaper sometimes means a smaller machine and a shallow grind that leaves roots to rot and heave. More expensive should come with a clear reason.