What stump grinding costs in Los Angeles
The typical stump grinding job here lands between $140 and $180. That price holds across a surprisingly wide range of stump sizes, from 12 inches to 30 inches in diameter. Grinders are efficient machines, and the diameter alone doesn't always drive cost as dramatically as you might expect.
What does move the price:
- Stump depth. Grinding 6 to 8 inches down is standard. If you want the area fully plantable, ask for 12 inches or more. Deeper work takes longer.
- Root system. Some stumps have surface roots spreading several feet out. Grinding those costs extra. Get it in the quote before work starts.
- Access. A stump in a tight side yard or behind a fence may require a smaller machine, which is slower and costs more.
- Debris removal. Most crews leave the wood chips on-site. Haul-away is usually an add-on.
- Multiple stumps. If you have two or three stumps, ask for a per-job rate rather than per-stump pricing. You'll often get a better deal.
TreeNerd lists 55 tree care businesses serving Los Angeles, including A Plus Tree, Acotillo Tree Service, and others. You can compare them at TreeNerd to get a shortlist before calling for quotes.
Permits and protected trees in Los Angeles
For a typical backyard stump from a non-native ornamental tree, you probably don't need a permit. But LA has strict rules for certain trees, and ignoring them can be expensive.
The city protects several native species on private property. California oaks, Southern California black walnut, western sycamore, California bay, Mexican elderberry, and toyon all fall under protection once their cumulative trunk diameter reaches 4 inches measured 4.5 feet above ground. Grinding the stump of a protected tree counts as potentially destructive work. You need a permit from the Urban Forestry Division before proceeding, and replacement planting at a 2:1 ratio is typically required.
Street trees are a separate category. Los Angeles has roughly 660,000 street trees, and the city's policy strongly favors keeping them. Street-tree removal is only approved in specific circumstances like unsafe conditions, sidewalk repairs, or utility work.
Historic-Cultural Monument trees get the strictest protection. Removing one requires public posting, notice to the Historic-Cultural Monument Commission, and a Board of Public Works hearing, except in a public-safety emergency.
Permit fees exist but the City of Los Angeles Bureau of Street Services doesn't publish a flat rate, noting fees apply "if applicable." Call them or check with your contractor before assuming the permit is free.
How to choose a stump grinding contractor in LA
Get at least two quotes. The $140 to $180 range is the baseline, but what's included varies between crews.
Ask specifically:
- How deep will you grind?
- Are surface roots included?
- Do you haul chips, or do they stay?
- Are you licensed and insured in California?
California requires tree contractors to carry a C-61/D-49 limited specialty license for tree service work. Ask for the license number and verify it at the CSLB website before signing anything. An unlicensed crew that damages your irrigation, hardscape, or a neighbor's property leaves you holding the bill.
If your stump is from an oak or other possibly protected species, hire someone who knows LA's protected tree guidelines. A contractor who grinds first and asks questions later can put you in violation, not them.